Best 12-Socket Smart Charging Station Manufacturer | Surabaya, Indonesia - CE OCPP Wanlin
Executive Summary: 12-Socket Smart Charging Station for Global Buyers
The one-paragraph takeaway The WL-CS12 runs twelve metered sockets on a single cabinet, balances total load under a 36kW ceiling, and meters every port to 1% accuracy over an OCPP 1.6J link. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. Measured result netting the buyer a 32% margin against the previous supplier for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Surabaya Municipal Project Contractor Sourcing Success
The request that opened the account was a fault report, not a purchase order. Importers are consolidating charging SKUs with fewer factories that can document OCPP conformance and IP ratings.
After the operator's own four-week load-balance logging test, Anucha Limwong selected Wanlin as their EV charging manufacturing partner. The buyer admitted the deciding factor was a supplier who answered protocol questions in hours, not weeks.
- A 48-hour continuous-load rack cycles every station to catch relay and meter failures early
- The production line follows ISO9001 procedures with incoming, in-process and outgoing inspection records
- a private label run can start from 50 units on existing tooling with new packaging
The bike shed had a row of scorched sockets and a handwritten notice telling riders to bring their own timers.
Problem Analysis & Field Report: Why Global Buyers Need 12-Socket Smart Charging Station
The complaint did not arrive through the returns portal; it arrived as a repeat-order question. A fleet operator found sockets on cheap charging boards scorched within months of monsoon humidity and overnight loads.
Field case: A facilities company in Surabaya replaced scorched generic boards with the WL-CS12 after a fire-safety review. The per-port breakers and RCD passed the review on paper and in a witnessed trip test, and the company standardized the model across its portfolio.
Why it matters for global buyers:
- unmetered flat-rate boards create billing disputes and breaker trips
- the fix was per-port metering plus a firmware load cap matched to the feeder
- property buyers now ask for trip-test records before price lists
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin 12-Socket Smart Charging Station
What the pilot units had in common was a single mainboard with per-port metering and a contactor rated for real monsoon humidity.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Ports | 12 sockets, 2 upgradable to fast charge |
| Output per Port | 220V AC, 3.3kW max per port |
| Total Capacity | dynamic load balancing holds site demand under a set kW ceiling |
| Payment | QR code and RFID card payment |
| Connectivity | OCPP 1.6J over WebSocket, 4G and WiFi dual-link |
| Display | 4.3-inch LCD with per-port status and tariff display |
| Protection | overload, short circuit, surge, leakage and overheat protection per port |
| Housing | IP54 galvanized steel cabinet with IK10 front panel |
| Metering | per-port energy metering with 1% accuracy class |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Residential community bike shed | WL-CS12 | Twelve riders charge overnight while load balancing keeps the site breaker cool |
| Condominium basement parking | WL-CS12 | Per-port metering lets the HOA bill each unit for exact consumption |
| Motorcycle taxi queue stand | WL-CS12 | Drivers scan, charge and go while the station logs every session |
| University campus bike area | WL-CS12 | Student plans bill by kWh instead of flat-rate slot fees |
| Factory worker parking shed | WL-CS12 | Shift-based timers stop batteries cooking through the day |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- A 48-hour continuous-load rack cycles every station to catch relay and meter failures early
- The production line follows ISO9001 procedures with incoming, in-process and outgoing inspection records
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
Ranked on what caused the previous supplier to lose the account, the factory scored first on every row that mattered.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
From the first sample request to the sailing date, the buyer could see each gate in writing. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
Different markets, same conclusion, in the words of the buyers themselves.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "We listed the same station under our house brand and the uptime held above 99%."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "Our support line used to get billing-dispute calls weekly. That queue has gone quiet."
- Anucha Limwong (Municipal Project Contractor, Surabaya, Indonesia): "We listed the same station under our house brand and the uptime held above 99%."
Frequently Asked Questions
Q: How does load balancing work on the WL-CS12?
A: The station watches total site current and trims per-port output when the ceiling set in firmware is approached, so old building wiring stays safe.
Q: Can riders pay by scanning a QR code?
A: Yes, each port has its own QR linked to local wallet payment, plus RFID card and app options.
Q: Does it connect to our charging management platform?
A: It speaks OCPP 1.6J over WebSocket and has passed integration with common CSMS platforms used across Southeast Asia.
Q: What happens when the 4G signal drops?
A: Ports finish active sessions on cached tariff rules and the station reconnects automatically; local authorization keeps working offline.
Q: Can we put our brand on the cabinet?
A: Yes, logo printing, cabinet colors and custom port labels start from 50 units.
Project Summary
Measured result By working directly with manufacturer Wanlin, the Municipal Project Contractor team in Surabaya reached 32% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
